![dsc radio on nmea 2000 network dsc radio on nmea 2000 network](https://citimarinestore.com/40682-thickbox_default/icom-m506-11-black-vhf-radio-nmea2000-front-mic-m506-11.jpg)
The NMEA 2000 network, like the SAE J1939 network on which it is based, is organized around a bus topology, which requires a single 120Ω termination resistor at each end of the bus (the resistors are in parallel, so a properly terminated bus should have a total resistance of 60Ω).
#Dsc radio on nmea 2000 network serial
NMEA 2000 supports a disciplined multiple-talker, multiple-listener data network whereas NMEA 0183 requires a single-talker, multiple-listener (simplex) serial communications protocol. Using NMEA 0183/-HS connectivity, the transponder can connect to a transceiver, plotter device, marine radar or GPS receiver. 4800 bits/second for NMEA 0183) and uses a compact binary message format as opposed to the ASCII serial communications protocol used by NMEA 0183. With the plug-and-play functionality of NMEA 2000, the MA-510TR can connect to a NMEA 2000 network (an external plotter, marine radar and VHF radio).
![dsc radio on nmea 2000 network dsc radio on nmea 2000 network](https://ae01.alicdn.com/kf/H5268e0848ffe4b62abd35a11c62db5b27/Furuno-VHF-Class-D-DSC-FM-4800-5-in.png)
It has a significantly higher data rate (250k bits/second vs. NMEA 2000 is a successor to the NMEA 0183 serial data bus standard. NMEA 2000 devices and J1939 devices can be made to co-exist on the same physical network. NMEA 2000 is based on the SAE J1939 high-level protocol, but instead defines its own messages. NMEA 2000, often abbreviated to NMEA2K or N2K, is the protocol that connects devices using the Controller Area Network (CAN) technology originally developed for the auto industry. The RS12 is probably going to be the lowest cost radio with NMEA-2000, as it is priced at under 200 at discounted retail. This radio combines the Class-D DSC VHF Marine Band radio with a NMEA-2000 interface, without the added AIS feature. NMEA 1803, and its successor NMEA 2000, are plug-and-play communications protocols developed by NMEA to allow devices made by different manufacturers to communicate with each other. Not mentioned in the initial article, but worthy of note, is the SIMRAD radio model RS12. During its early inception, NMEA focused its efforts on improving communications amongst manufactures. The National Marine Electronics Association (NMEA) was founded in 1957 to strengthen the relationships between electronic manufacturers. The plug-and-play interface allows devices made by different manufacturers to communicate with each other within the same network without causing interference between devices. NMEA 2000 is a plug-and-play communications standard used for connecting marine instrumentation within vessels.